Home             urq20v.com

Up


Something else the the urq engine bay lacks is a + battery post. With the battery under the back seat it a jump start can be difficult. Of course I will never need a jump, but I may need to give one someday.

The brace that was previously used for the coil should work nicely. There is already a hole with a nut welded to the back. There is also another hole is a good spot that is big enough for a M6 bolt to fit through.

The location will be close to my strut tower cross brace, but I tied some jumper cables and it will work.

I'm going to have to think about a - battery post. Since I have powder coated almost everything under the hood, I don't know if there will be anywhere to get a good connection to Gound.